D375A-3A-01 S/N 17001-UP
289 pages · 263 diagrams
- D375A-3A-01
- BULLDOZERS
KOMATSU D375A-3A-01 S/N 17001-UP
ENGINE RELATED PARTS
ENGINE MOUNT
MUFFLER AND DRAIN TUBE(#17001-17179)
MUFFLER AND DRAIN TUBE(#17180-)
ALTERNATOR HARNESS
MAIN HARNESS (WITH SHOE SLIP CONTROL)
DAMPER
AIR CONDITIONER PIPING (LARGE CAPACITY AIR CONDITIONER)(#17501-17507)
AIR CONDITIONER PIPING (LARGE CAPACITY AIR CONDITIONER)(#17508-)
AIR COMPRESSOR RELATED PARTS
AIR COMPRESSOR
HEATER PIPING
HEATER PIPING (LARGE CAPACITY AIR CONDITIONER)(#17501-)
HEATER PIPING (ADDITIONAL HEATER)(#17501-)
COOLING SYSTEM
FUEL TANK AND RELATED PARTS
ELECTRICAL SYSTEM
POWER TRAIN AND FINAL DRIVE
UNIVERSAL JOINT
STEERING CASE
TRANSFER AND PINION
BEVEL GEAR
STEERING CLUTCH AND BRAKE (1/2)
STEERING CLUTCH AND BRAKE (2/2)
TRANSMISSION AND TORQUE CONVERTER SHAFT
STEERING AND BRAKE PIPING
STEERING VALVE
STEERING VALVE LEVER
STEERING CONTROL (VARIABLE POSITION LEVER)(#17501-)
POWER LINE TANK
GAUGE AND SUCTION LINE
STRAINER AND POWER LINE PUMP
FILTER
RETURN AND PIN PULLER PIPING
CONCENTRATED PIPING (VARIABLE POSITION LEVER)(#17501-)
POWER LINE MOUNT
TORQUE CONVERTER (1/3), BARE
TORQUE CONVERTER (2/3), INPUT AND DRIVE CASE
TORQUE CONVERTER (3/3), REAR HOUSING AND SCAVENGING PUMP
POWER TAKE OFF (1/2)
POWER TAKE OFF (2/2)
TORQUE CONVERTER VALVE (1/3)
TORQUE CONVERTER VALVE (2/3)
TORQUE CONVERTER VALVE (3/3)
TORQUE CONVERTER CHARGING PUMP
TRANSMISSION (1/8), BARE
TRANSMISSION (2/8), HOUSING (1/2)
TRANSMISSION (3/8), HOUSING (2/2)
TRANSMISSION (4/8), CARRIER (1/2)
TRANSMISSION (5/8), CARRIER (2/2)
TRANSMISSION (6/8), CASE (7TRACK ROLLER)
TRANSMISSION (7/8), TRANSFER
TRANSMISSION (8/8), INPUT AND OUTPUT
TRANSMISSION VALVE (1/2)
TRANSMISSION VALVE (2/2)
TRANSMISSION LUBRICATION VALVE
TRANSMISSION VALVE COVER
FINAL DRIVE (SPROCKET HUB) (7 TRACK ROLLER)(#17501-)
FINAL DRIVE (SPROCKET HUB) (REINFORCED TYPE) (7 TRACK ROLLER)(#17501-)
FINAL DRIVE, L.H. (CASE) (7 TRACK ROLLER)(#17501-)
FINAL DRIVE, L.H. (GEAR AND CARRIER) (7 TRACK ROLLER)(#17501-)
FINAL DRIVE, R.H. (CASE) (7 TRACK ROLLER)(#17501-)
FINAL DRIVE, R.H. (GEAR AND CARRIER) (7 TRACK ROLLER)(#17501-)
SERVO VALVE PIPING (FOR JAPAN) (WITH SHOE SLIP CONTROL) (VARIABLE POSITION LEVER)(#17501-)
POWER LINE MOUNT (MAIN FRAME)
SERVO VALVE (VARIABLE POSITION LEVER)(#17501-)
POWER LINE SUB CONTROL (VARIABLE POSITION LEVER)(#17501-)
POWER LINE WIRING (WITH SHOE SLIP CONTROL)
HYDRAULIC SYSTEM
HYDRAULIC TANK
HYDRAULIC VALVE LINE
DUAL TILT PITCH VALVE
HYDRAULIC PUMP
BLADE LIFT LINE (FOR TILT DOZER)
BLADE TILT LINE (FOR TILT DOZER)
BLADE TILT LINE (HYDRAULIC TANK) (FOR DUAL TILT PITCH DOZER)
BLADE TILT LINE (MAIN FRAME) (FOR DUALTILT PITCH DOZER)
BLANK PARTS (WITHOUT RIPPER)
RIPPER LINE (1/2)
RIPPER LINE (2/2)
RIPPER VALVE AND PIPING LESS
RIPPER VALVE AND PIPING (WITH RIPPER)
PIN PULLER LINE (WITH GIANT RIPPER)(#17001-17554)
PIN PULLER LINE (WITH GIANT RIPPER)(#17555-)
PIN PULLER LINE (WITH MULTI RIPPER)(#17001-17554)
PIN PULLER LINE (WITH MULTI RIPPER)(#17555-)
P.P.C. VALVE LINE (DUAL TILT PITCH DOZER)
P.P.C. VALVE LINE (TILT DOZER)
P.P.C. VALVE (WITH WIDE CAB)(#17501-)
MAIN FRAME AND RELATED PARTS
OPERATOR'S COMPARTMENT AND CONTROL SYSTEM
OPERATOR'S SEAT (TURN AND RECLINING TYPE) (FABRIC SEAT)(#17501-17652)
OPERATOR'S SEAT (TURN AND RECLINING TYPE) (FABRIC SEAT)(#17653-)
OPERATOR'S SEAT (TURN AND RECLINING TYPE) (LEATHER SEAT)(#17501-17655)- OPERATOR'S SEAT (TURN AND RECLINING TYPE) (LEATHER SEAT)(#17656-)
OPERATOR'S SEAT (TURN AND RECLINING TYPE) (FABRIC SEAT) (TACHIES+KAB T4)(#17501-)
ARM REST (WITH WIDE CAB)(#17501-)
ARM REST (WITHOUT RIPPER) (WITH WIDE CAB)(#17501-)
SEAT BELT (FOR KAB) (WITH WIDE CAB)(#17501-)
CAB (BODY) (WITH WIDE CAB)(#17501-)
CAB (DOOR AND LOCK) (1/2) (WITH WIDE CAB)(#17501-)
CAB (DOOR AND LOCK) (2/2) (WITH WIDE CAB)(#17501-)
CAB (DOOR WIPER)(WITH WIDE CAB)(#17501-)
CAB (WINDOW SASH) (WITH WIDE CAB)(#17501-)
CAB (PANEL SWITCH) (WITH WIDE CAB)(#17501-)
CAB (WIPER) (WITH WIDE CAB)(#17501-)
CAB (AM-FM RADIO AND CASSETTE STEREO) (WITH WIDE CAB)(#17501-)
CAB (ROOF LINING AND GARNISH) (WITH WIDE CAB)(#17501-)
CAB (AIR CONDITIONER DUCT) (WITH WIDE CAB)(#17501-)
CAB MOUNT(#17501-)
CAB (ENVELOPE PART) (WITH WIDE CAB)(#17501-)
FLOOR MAT (WITH WIDE CAB)(#17501-)
BACK MIRROR (WITH WIDE CAB)(#17501-)
SUNVISOR (WITH WIDE CAB)(#17501-)
ROPS GUARD (WITH WIDE CAB)(#17501-)
ROPS GUARD (WITH WIDE CAB AND BEACON)(#17501-)
EXTINGUISHER (JAPANESE)
FIRST AID BOX
THERMOS BOTTLE
LUNCH BOX BRACKET(#17501-)
FLOOR FRAME (WITH WIDE CAB)(#17501-)
FLOOR FRAME (WITHOUT WIDE CAB)(#17501-)
FLOOR FRAME (WITH WIDE CAB) (WITH ADDITIONAL HEATER)(#17501-)
FLOOR MOUNT (REAR) (VISCOUS TYPE)(#17501-)
FLOOR MOUNT (FRONT) (VISCOUS TYPE)(#17501-)
DASHBOARD (HEATER)(WITH SHOE SLIP CONTROL) (WITH WIDE CAB)(#17501-)
DASHBOARD (WITH SHOE SLIP CONTROL,WITH AIRCONDITIONER) (WITH WIDE CAB)(#17501-)
DASHBOARD (PANEL AND WIRING) (WITH SHOE SLIP CONTROL,WITH AIRCOND ITIONER) (WITH WIDE CAB)(#17501-)
AIR CONDITIONER UNIT (LARGE CAPACITY AIR CONDITIONER)(#17501-)
BLOWER (LARGE CAPACITY AIR CONDITIONER)(#17501-)
WIRING (FLOOR) (WITH SHOE SLIP CONTROL) (WITH WIDE CAB)(#17501-)
STEERIG AND TRANSMISSION LEVER (VARIABLE POSITION LEVER) (1/3)(#17501-)
STEERIG AND TRANSMISSION LEVER (VARIABLE POSITION LEVER) (2/3)(#17501-)
STEERIG AND TRANSMISSION LEVER (VARIABLE POSITION LEVER) (3/3)(#17501-)
FUEL CONTROL LEVER (VARIABLE POSITION LEVER)(#17501-)
PEDAL COVER (VARIABLE POSITION LEVER)(#17501-)
DECELERATOR PEDAL (VARIABLE POSITION LEVER)(#17501-)
GAVERNOR CONTROL LINKAGE (BARIABLE POSITION LEVER)(#17501-)
SERVO VALVE PIPING (FOR JAPAN)(#17261-)
CONNECTOR AND CAP (WITHOUT PIN PULLER)
PIN PULLER SWITCH
BLADE CONTROL (DUAL TILT DOZER) (1/2) (VARIABLE POSITION LEVER)(#17501-)
BLADE CONTROL (TILT DOZER) (1/3) (VARIABLE POSITION LEVER)(#17501-)
BLADE CONTROL (DUAL TILT DOZER) (2/2) (VARIABLE POSITION LEVER)(#17501-)
BLADE CONTROL (TILT DOZER) (2/3) (VARIABLE POSITION LEVER)(#17501-)
BLADE CONTROL (TILT DOZER) (3/3) (VARIABLE POSITION LEVER)(#17501-)
RIPPER CONTROL (FOR RIGIT TYPE RIPPER) (VARIABLE POSITION LEVER)(#17501-)
RIPPER CONTROL (FOR VARIABLE TYPE RIPPER) (VARIABLE POSITION LEVER)(#17501-)
RIPPER CONTROL (WITH SHOE SLIP CONTROL) (VARIABLE POSITION LEVER)(#17501-)
WASHER TANK (WITH WIDE CAB)(#17501-)
GUARD
RADIATOR AND WIND BREAK
RESERVE TANK
COOLING FAN (BLOWER)
REVERSIBLE FAN(#17501-)
FAN DRIVE
BLADE LIFT LINE (GUARD)
RADIATOR GUARD
RADIATOR GUARD (RADIATOR TILT SPEC.)(#17523-)
WIRING (RADIATOR GUARD)(#17692-)
FAN GUARD (WITH AIR CONDITIONER)
FAN GUARD (WITHOUT AIR CONDITIONER)
BLADE LIFT LINE (GUARD)
LIFT CYLINDER SUPPORT AND SEAL
RADIATOR MASK (PERFORATED)- HYDRAULIC OIL COOLER
LIFT CYLINDER SUPPORT
RADIATOR GUARD RETATED
HEAD LAMP AND WIRING(#17001-17691)
HEAD LAMP AND WIRING(#17692-)
ENGINE HOOD AND SIDE COVER (L.H.) (PERFORATED) (WITH PRE CLEANER)(#17501-)
ENGINE HOOD AND SIDE COVER (OPEN) (WITH PRE CLEANER)(#17501-)
ENGINE HOOD AND SIDE COVER (R.H.) (PERFORATED)
ENGINE HOOD AND SIDE COVER (L.H.) (COLD WEATHER SPEC.) (WITH PRE CLEANER)(#17501-)
FUEL CONTROL LEVER (WITH SHOE SLIP CONTROL)
FUEL CONTROL (WITH SHOE SLIP CONTROL)- FUEL CONTROL (WITH SHOE SLIP CONTROL) (REINFORCED TYPE)(#17501-)
FUEL CONTROL LINKAGE (WITH SHOE SLIP CONTROL)(LARGE CAPACITY AIR CONDITIONER)(#17501-)
FENDER (FOR EC AND JAPAN) (1/2) (FOR VISCOUS MOUNT RELATED)(#17501-)
FENDER (FOR EC AND JAPAN) (2/2) (FOR VISCOUS MOUNT RELATED)(#17501-)
WORK LAMP(#17001-17691)
WORK LAMP(#17692-)
MAIN POWER (FUSE BOX AND BACK UP ALARM) (WITH WIDE CAB)(#17501-)
REAR COVER
ROPS MOUNT (WITH WIDE CAB)(#17501-)
UNDER GAURD (7 TRACK ROLLER)
UNDER CARRIAGE
FRONT IDLER (7 TRACK ROLLER)(#17501-)
RECOIL SPRING (7 TRACK ROLLER)(#17501-)
TRACK ROLLER (7 TRACK ROLLER)(#17501-)
PIN (7 TRACK ROLLER)(#17501-)
BOGIE (7 TRACK ROLLER)(#17501-)
CARRIER ROLLER
TRACK SHOE (LUBRICATE TYPE) (MASTER LINK 4 PLACE TYPE)
TRACK SHOE (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (WITH RING) (FOR LIMESTONE) (610MM WIDE)
TRACK SHOE (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (710MM WIDE)(#17578-)- TRACK SHOE (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (810MM WIDE)(#17578-)
- TRACK SHOE (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (FOR ANTI CHIPPING) (610MM WIDE)(#17578-)
- TRACK SHOE (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (FOR LIMESTONE) (610MM WIDE)(#17578-)
TRACK FRAME (7 TRACK ROLLER)(#17501-)
FULL ROLLER GUARD (6 TRACK ROLLER)
ROLLER GUARD (7 TRACK ROLLER)(#17501-)- FULL ROLLER GUARD (6 TRACK ROLLER)
WORK EQUIPMENT
STRAIGHT TILT FRAME
STRAIGHT TILT FRAME (WITH BUSHING)(#17549-)
STRAIGHT TILT FRAME (REINFORCED TYPE) (WITH BUSHING)(#17549-)
FULL-U BLADE (REINFORCED TYPE)
TILT SEMI-U BLADE
FULL-U BLADE
STRAIGHT TILT SEMI-U BLADE (REINFORCED TYPE)
SEMI-U BLADE (REINFORCED TYPE) (WITH PUSHER PLATE)
STRAIGHT TILT SEMI-U BLADE (WITH PUSHER PLATE)
TILT SEMI-U BLADE (WITH BUSHING)(#17549-)
TILT FULL-U BLADE (WITH BUSHING)(#17549-)
TILT SEMI-U BLADE (REINFORCED TYPE) (WITH BUSHING)(#17549-)
FULL-U BLADE (REINFORCED TYPE) (WITH BUSHING)(#17549-)
TILT SEMI-U BLADE (REINFORCED TYPE) (WITH BUSHING) (WITH PUSHER PLATE)(#17549-)
TILT SEMI-U BLADE (WITH PUSHER PLATE) (WITH BUSHING)(#17549-)
TILT SEMI-U BLADE (WITH BUSHING) (LIME STONE SPEC.)(#17578-)
BLADE LIFT CYLINDER
BLADE LIFT CYLINDER (WITHOUT MACHINE)
BLADE TILT CYLINDER AND BRACE
HYDRAULIC PIPING (BLADE TILT LINE) (FOR DUAL TILT PITCH DOZER)
HYDRAULIC PIPING (BLADE TILT LINE)
HYDRAULIC PIPING (BLADE TILT LINE) (FOR DUAL TILT PITCH DOZER)
MULTI SHANK RIPPER
GIANT RIPPER (VARIABLE TYPE)
RIPPER CYLINDER PIPING
PIN PULLER PIPING (FOR GIANT RIPPER)
RIPPER POINT LIGHT
DRAWBAR
COUNTER WEIGHT AND DRAWBAR
ADD WEIGHT COUNTER WEIGHT AND DRAWBAR
MARKS AND PLATES
ACCESSORY
SERVICE KIT AND COMPONENT PARTS
KIT (TORQUE CONVERTER AND TRANSMISSION)
TRACK LINK (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (SUPPLY PARTS)(#17578-)- TRACK LINK (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (FOR ANTI CHIPPING) (SUPPLY PARTS)(#17578-)
RUBBER ANTENNA(#17501-)
HYDRAULIC PUMP (1/3)
HYDRAULIC PUMP (2/3)
HYDRAULIC PUMP (3/3)
POWER LINE PUMP
BLADE LIFT CYLINDER
BLADE TILT CYLINDER
BLADE TILT CYLINDER (L.H.) (FOR PITCH DOZER)
BLADE TILT CYLINDER (R.H.) (FOR PITCH DOZER)
RIPPER LIFT CYLINDER
RIPPER TILT CYLINDER(#17001-17607)
RIPPER TILT CYLINDER(#17608-)
PINPULLER CYLINDER
CONTROL VALVE (1/2) (BLADE LIFT)
CONTROL VALVE (2/2) (BLADE LIFT)
CONTROL VALVE (1/2) (RIPPER LOW)
CONTROL VALVE (2/2) (RIPPER LOW)
CONTROL VALVE (RIPPER HIGH) (-50 DEG. SPEC.)- CONTROL VALVE (1/2) (BLADE LIFT) (-50 DEG. SPEC.)
CONTROL VALVE (2/2) (BLADE LIFT) (-50 DEG. SPEC.)
PPC VALVE (FOR TILT DOZER AND DUAL TILT DOZER) (VARIABLE POSITIONLEVER)(#17501-)- PPC VALVE (FOR TILT DOZER) (VARIABLE POSITION LEVER)(#17501-)
PPC VALVE (FOR LIGHT AND VARIABLE TYPE RIPPER,SHOE SLIP CONTROL) (VARIABLE POSITION LEVER)- PPC VALVE (FOR VARIABLE TYPE RIPPER) (VARIABLE POSITION LEVER)
SAFETY VALVE (FOR PPC VALVE) (WITH WIDE CAB)(#17501-)