D475A-5A S/N 20001-UP (Super Dozer Spec.)
614 pages · 598 diagrams
- D475A-5A
- Bulldozer - Large(D80-)
D475A-5A S/N 20001-UP (Super Dozer Spec.)
ENGINE RELATED PARTS
ENGINE MOUNT
MUFFLER AND RAIN CAP
DAMPER
COMPRESSOR MOUNTING
COMPRESSOR MOUNTING (SAND AND DUSTY TERRAIN SPEC.)(#20036-)
COMPRESSOR PIPING
COMPRESSOR PIPING (WITH HEATER)
COMPRESSOR
COMPRESSOR (FOR SAND AND DUSTY TERRAIN SPEC.)(#20036-)
HEATER PIPING
PRE-LUBLICATION UNIT(#20001-20176)
PRE-LUBLICATION UNIT(#20177-)
COOLING SYSTEM
FUEL TANK AND RELATED PARTS
FUEL TANK
FUEL PIPING(#20001-20213)
FUEL PIPING(#20214-)
FUEL ENGINE PIPING (1/2)(#20001-.)
FUEL ENGINE PIPING (1/2)(#.-)
FUEL ENGINE PIPING (1/2) (WITHOUT WATER SEPARATOR)(#20001-.)
FUEL ENGINE PIPING (1/2) (WITHOUT WATER SEPARATOR)(#.-)
FUEL ENGINE PIPING (2/2)
FUEL ENGINE PIPING (2/2) (WITHOUT WATER SEPARATOR )
ELECTRICAL SYSTEM
POWER TRAIN AND FINAL DRIVE
UNIVERSAL JOINT
POWER TRAIN (1/14) (COMPONENT)
POWER TRAIN (2/14) (TORQUE CONVERTER BYPASS)
POWER TRAIN (3/14) (TANK)(#20001-20001)
POWER TRAIN (3/14) (TANK)(#20002-)
POWER TRAIN (3/14) (TANK) (FOR OIL AND COOLANT HEATER)(#20001-20001)
POWER TRAIN (3/14) (TANK) (FOR OIL AND COOLANT HEATER)(#20002-)
POWER TRAIN (4/14) (GAUGE AND SUCTION PIPING)
POWER TRAIN (5/14) (STRAINER AND POWER TRAIN PUMP)
POWER TRAIN (6/14) (DELIVERY PIPING (1/2))
POWER TRAIN (7/14) (DELIVERY PIPING (2/2))
POWER TRAIN (8/14) (POWER TRAIN FILTER)
POWER TRAIN (9/14) (TORQUE CONVERTER AND TRANSMISSION FILTER)
POWER TRAIN (10/14) (RETURN AND PIN PULLER PIPING)
POWER TRAIN (11/14) (CONCENTRATED PIPING (1/2))
POWER TRAIN (12/14) (CONCENTRATED PIPING (2/2))(#20001-20001)
POWER TRAIN (12/14) (CONCENTRATED PIPING (2/2))(#20002-)
POWER TRAIN (13/14) (POWER TRAIN MOUNT)
POWER TRAIN (14/14) (STEERING CONTROL)(#20001-(10006))
POWER TRAIN (14/14) (STEERING CONTROL)
POWER TRAIN (15/15) (POWER TRAIN BUTTON)
TORQUE CONVERTER BARE
TORQUE CONVERTER INPUT SHAFT
TORQUE CONVERTER CASE
TORQUE CONVERTER REAR HOUSING AND SCAVENGING PUMP
POWER TAKE OFF (1/2)
POWER TAKE OFF (2/2)
TORQUE CONVERTER VALVE (1/3)
TORQUE CONVERTER VALVE (2/3)
TORQUE CONVERTER VALVE (3/3)
TORQUE CONVERTER CHARGING PUMP
TRANSMISSION BARE (1/5) (1ST HOUSING)
TRANSMISSION BARE (2/5) (2ND AND 3RD HOUSING)
TRANSMISSION BARE (3/5) (REAR AND FRONT HOUSING)
TRANSMISSION BARE (4/5) (CARRIER (1/2))
TRANSMISSION BARE (5/5) (CARRIER (2/2))
TRANSMISSION CASE
TRANSFER
TRANSMISSION INPUT AND OUTPUT
TRANSMISSION CONTROL VALVE (1/4)
TRANSMISSION CONTROL VALVE (2/4)
TRANSMISSION CONTROL VALVE (3/4)
TRANSMISSION CONTROL VALVE (4/4)
STEERING (1/8) (CASE)
STEERING (2/8) (TRANSFER AND PINION)(#20001-20229)
STEERING (2/8) (TRANSFER AND PINION)(#20230-)
STEERING (3/8) (BEVEL GEAR)
STEERING (4/8) (STEERING CLUTCH AND BRAKE (1/2))
STEERING (5/8) (STEERING CLUTCH AND BRAKE (2/2))
STEERING (6/8) (TRANSMISSION AND TORQUE CONVERTER SHAFT)
STEERING (7/8) (STEERING AND BRAKE PIPING)
STEERING (8/8) (STEERING VALVE)
FINAL DRIVE (L.H.) (1/3)(#20001-20267)
FINAL DRIVE (L.H.) (1/3)(#20268-)
FINAL DRIVE (L.H.) (1/3) (TAR SAND SPEC.)
FINAL DRIVE (L.H.) (2/3)
FINAL DRIVE (L.H.) (2/3) (TAR SAND SPEC.)
FINAL DRIVE (L.H.) (3/3)
FINAL DRIVE (L.H.) (3/3) (TAR SAND SPEC.)
FINAL DRIVE (R.H.) (1/3)(#20001-20267)
FINAL DRIVE (R.H.) (1/3)(#20268-)
FINAL DRIVE (R.H.) (1/3) (TAR SAND SPEC.)
FINAL DRIVE (R.H.) (2/3)
FINAL DRIVE (R.H.) (2/3) (TAR SAND SPEC.)
FINAL DRIVE (R.H.) (3/3)
FINAL DRIVE (R.H.) (3/3) (TAR SAND SPEC.)
POWER TRAIN MOUNT
BRAKE ROD CONTROL
POWER TRAIN WIRING HARNESS
HYDRAULIC SYSTEM
HYDRAULIC PUMP
HYDRAULIC PUMP DELIVERY PIPING
HYDRAULIC PUMP SUCTION PIPING
BLADE LIFT PIPING (1/2)
BLADE LIFT PIPING (2/2)
BLADE TILT PIPING (FOR TILT DOZER)
RIPPER PIPING
PIN PULLER PIPING (WITH GIANT RIPPER)
FAN PUMP
FAN PUMP DELIVERY PIPING
FAN PUMP RETURN PIPING(#20001-20213)
FAN PUMP RETURN PIPING(#20214-)
P.P.C. DRAIN PIPING
P.P.C. DRAIN PIPING (FOR SINGLE TILT DOZER)
MAIN FRAME AND RELATED PARTS
OPERATOR'S COMPARTMENT AND CONTROL SYSTEM
OPERATOR'S SEAT (TILT FABRIC SEAT)
OPERATOR'S SEAT (TILT FABRIC SEAT) (HIGH BACK)
OPERATOR'S SEAT (FABRIC SEAT) (WITH HEAD REST)
OPERATOR'S SEAT (ADJUSTER)
OPERATOR'S SEAT (FABRIC SEAT) (HIGH BACK) (WITH HEAD REST)
OPERATOR'S SEAT (FABRIC SEAT) (HIGH BACK) (AIR SUS SEAT)
OPERATOR'S SEAT (TILT FABRIC SEAT) (HIGH BACK) (AIR SUS SEAT) (WITH HEAD REST)
OPERATOR'S SEAT STAND
SEAT BELT (78MM)
SEAT BELT (FOR KAB)
CAB (BODY)
CAB (BODY) (MSHA SPEC.)
CAB (DOOR AND LOCK) (1/2)(#20001-20228)
CAB (DOOR AND LOCK) (1/2)(#20229-)
CAB (DOOR AND LOCK) (1/2) (HIGH STRENGHT 40PSI GLASS)(#20001-20228)
CAB (DOOR AND LOCK) (1/2) (HIGH STRENGHT 40PSI GLASS)(#20229-)
CAB (DOOR AND LOCK) (1/2) (FOR DOUBLE WIPER)(#20001-20228)
CAB (DOOR AND LOCK) (1/2) (FOR DOUBLE WIPER)(#20229-)
CAB (DOOR AND LOCK) (2/2)(#20001-20228)
CAB (DOOR AND LOCK) (2/2)(#20229-)
CAB (DOOR AND LOCK) (2/2) (FOR DOUBLE WIPER)(#20001-20228)
CAB (DOOR AND LOCK) (2/2) (FOR DOUBLE WIPER)(#20229-)
CAB (DOOR WIPER)
CAB (DOOR DOUBLE WIPER)
CAB (WINDOW SASH)
CAB (WINDOW NO SASH)
CAB (WINDOW SASH) (HIGH STRENGHT 40PSI GLASS)
CAB (PANEL SWITCH)
CAB (PANEL SWITCH) (FOR DOUBLE WIPER)
CAB (WIPER)(#20001-20228)
CAB (WIPER)(#20229-)
CAB (FOR DOUBLE WIPER) (FRONT AND REAR)(#20001-20228)
CAB (FOR DOUBLE WIPER) (FRONT AND REAR)(#20229-)
CAB (AM-FM RADIO AND CASSETTE STEREO) (FOR EU SPEC.)
CAB (AM-FM RADIO AND CASSETTE STEREO) (FOR USA SPEC.)
CAB (WITHOUT RADIO)
CAB (ROOF LINING AND GARNISH) (WITH RADIO)
CAB (AIR CONDITIONER DUCT)(#20001-20228)
CAB (AIR CONDITIONER DUCT)(#20229-)
CAB MOUNT (NO SASH)
CAB MOUNT (HIGH STRENGTH 40PSI GLASS)
CAB MOUNT (SUN VISOR)
CAB (ENVELOPE PARTS) (1/2)(#20001-20002)
CAB (ENVELOPE PARTS) (1/2)(#20003-)
CAB (ENVELOPE PARTS) (2/2)(#20001-20046)
CAB (ENVELOPE PARTS) (2/2)(#20047-20137)
CAB (ENVELOPE PARTS) (2/2)(#20138-20157)
CAB (ENVELOPE PARTS) (2/2)(#20158-20228)
CAB (ENVELOPE PARTS) (2/2)(#20229-)
FLOOR MAT
BACK MIRROR
SUNVISOR
ROPS GUARD
BEACON LAMP
EXTINGUISHER (ENGLISH)
EXTINGUISHER (ARBIC)
EXTINGUIHER (CHINESE)
EXTINGUISHER (FRENCH)
EXTINGUISHER (GERMAN)
EXTINGUISHER (CZECH)
EXTINGUISHER (INDONESIAN)
EXTINGUISHER (PORTUGUESE)
EXTINGUISHER (RUSSIAN)
EXTINGUISHER (SPANISH)
EXTINGUISHER (PERSIAN)
EXTINGUISHER (ITALIAN)
EXTINGUISHER (GREEK)
EXTINGUISHER (POLISH)
FIRST AID BOX
THERMOS BOTTLE
WORKING LAMP
LUNCH BOX MOUNT (WITH CAB)
FLOOR FRAME
ARMREST
WIRING HARNESS (FLOOR)
CONTROLLER BOX
WIRING HARNESS (RELAY BOX)
BLANK PARTS (WITHOUT SSC/VHMS)(#20034-)
FLOOR FRAME (TRAVEL CONTROL) (LEVER AND CONSOLE L.H.)(#20001-20179)
FLOOR FRAME (TRAVEL CONTROL) (LEVER AND CONSOLE L.H.)(#20180-)
FLOOR FRAME (TRAVEL CONTROL) (LEVER AND CONSOLE) (ONE-WAY STEERING LEVER)
LIFT AND SLIDER(#20001-20010)
LIFT AND SLIDER(#20011-20179)
LIFT AND SLIDER(#20180-)
LIFT
TRAVEL CONTROL (ADJUST LINK)
BRAKE CONTROL LEVER(#20001-20231)
BRAKE CONTROL LEVER(#20232-)
BRAKE PEDAL COVER
DECELERATOR PEDAL
BLADE CONTROL (1/2) (FOR DUAL TILT DOZER)(#20001-20231)
BLADE CONTROL (1/2) (FOR DUAL TILT DOZER)(#20232-)
BLADE CONTROL (1/2) (FOR TILT DOZER)(#20001-20024)
BLADE CONTROL (1/2) (FOR TILT DOZER)(#20025-20231)
BLADE CONTROL (2/2) (FOR DUAL TILT DOZER)(#20001-20229)
BLADE CONTROL (2/2) (FOR DUAL TILT DOZER)(#20230-)
BLADE CONTROL (2/2) (FOR TILT DOZER)(#20001-20229)
BLADE CONTROL (2/2) (FOR TILT DOZER)(#20230-)
BLADE CONTROL (2/2) (SUPER DOZER) (WITHOUT RIPPER)(#20001-20229)
BLADE CONTROL (2/2) (SUPER DOZER) (WITHOUT RIPPER)(#20230-)
ARMREST (WITH RIPPER)
ARMREST (WITHOUT RIPPER)
BLADE CONTROL LEVER (FOR TILT DOZER)(#20122-)
BLADE CONTROL LEVER (FOR SUPER DOZER)(#20001-20047)
BLADE CONTROL LEVER (FOR SUPER DOZER)(#20048-)
RIPPER CONTROL LEVER
COVER (WITHOUT RIPPER CONTROL LEVER)
DASHBOARD PANEL (WITHOUT ADDITIONAL HEATER) (FOR SUPER DOZER)
FLOOR MOUNT SUPPORT (FRONT) (FOR PALM CONTROL SPEC.)
AIR CONDITIONER
AIR CONDITIONER (WITH ADDITIONAL HEATER)
AIR CONDITIONER DUCT
AIR CONDITIONER PIPING
AIR CONDITIONER PIPNG (ADDITIONAL HEATER) (1/2)(#20001-20235)
AIR CONDITIONER PIPNG (ADDITIONAL HEATER) (1/2)(#20236-)
AIR CONDITIONER PIPNG (ADDITIONAL HEATER) (2/2)(#20001-20235)
AIR CONDITIONER PIPNG (ADDITIONAL HEATER) (2/2)(#20236-)
FLOOR COVER(#20001-20231)
FLOOR COVER(#20232-)
FLOOR MOUNT (FRONT)
MONITER PANEL
MONITER PANEL (WITHOUT SHOE SLIP CONTROL)
DECAL (FOR TILT DOZER)
DECAL (FOR SUPER DOZER) (GIANT RIPPER)
DECAL (MULTI RIPPER)
DECAL (FOR SUPER DOZER) (WITHOUT RIPPER)
DECAL (FOR SUPER DOZER) (MULTI RIPPER)
DECAL (WITHOUT RIPPER)(#20034-)
DECAL (FOR MULTI RIPPER)
DECAL (WITHOUT RIPPER,SSC)
JOINT (ADDITIONAL HEATER)
HEATER ASS'Y
FLOOR COVER
FLOOR COVER (WITH ADDITIONAL HEATER)
WIRING HARNESS (FLOOR EARTH)
PEDAL COVER
VHMS CONTROLLER BOX (WITHOUT ORBCOMM)
VHMS CONTROLLER BOX (WITH ORBCOMM)
VHMS CONTROLLER BOX (MMS KIT) (WITH CONTROLLER)(#20001-20010)
VHMS CONTROLLER BOX (MMS KIT) (WITHOUT CONTROLLER)(#20011-)
VHMS CONTROLLER BOX (WITHOUT VHMS)
VHMS CONTROLLER BOX (WITH ORBCOMM) (EXCEPT JAPAN)
GUARD
RADIATOR
RADIATOR (WITHOUT SIGHT GAUGE)
SUB RADIATOR (WITH SIGHT GAUGE)
SUB RADIATOR (WITHOUT SIGHT GAUGE)
OIL COOLER (WITH AIR CONDITIONER)
DUAL RADIATOR MOUNT
FAN MOTOR
FAN MOTOR PIPING
BRADE LIFT PIPING (1/2)
BLADE LIFT PIPING (2/2)
RADIATOR GUARD
HEAD LAMP AND WIRING HARNESS
HEAD LAMP AND WIRING HARNESS (FOR TILT DOZER)
BLADE LIFT CYLINDER YOKE(#20001-20055)
BLADE LIFT CYLINDER YOKE(#20056-)
RADIATOR MASK (PERFORATED)
RADIATOR MASK (GRID)
RADIATOR MASK (GRID) (WITHOUT SIDE COVER)
SOUND SUPPRESSION AND TIP CLEARANCE
HEAD LAMP AND WIRING HARNESS (FOR HEAVY DUTY )(#20001-20213)
HEAD LAMP AND WIRING HARNESS (FOR HEAVY DUTY )(#20214-)
POTENTIO SENSOR (FOR DUAL TILT DOZER)
FAN NET
FAN NET (WUTHOUT SIDE COVER)
HEAD LAMP AND HORN
STAY CAP BOLT(#20001-20213)
STAY CAP BOLT(#20214-)
BLADE LIFT CYLINDER YOKE
ENGINE HOOD (1/2)
ENGINE HOOD (1/2) (CLOSE)
ENGINE HOOD (OPEN) (1/2)
ENGINE HOOD (2/2)(#20001-20110)
ENGINE HOOD (2/2)(#20111-)
ENGINE HOOD (2/2) (CLOSE)
ENGINE HOOD (OPEN) (2/2)
ENGINE SIDE COVER
ENGINE SIDE COVER (CLOSE)
ENGINE COVERS (OPEN)
HOOD DUCT
HOOD DUCT (TURBO 2)(#20034-)
HOOD DUCT (ENGINAIRE)(#20036-)
HOOD MOUNT AND SIDE COVER (UPPER)
HOOD MOUNT AND SIDE COVER (UPPER) (CLOSE)
HOOD MOUNT AND SIDE COVER (UPPER) (OPEN)
ENGINE BOTTOM SIDE COVER
ENGINE BOTTOM SIDE COVER (CLOSE)
ENGINE BOTTOM SIDE COVER (OPEN)
DUSH COVER AND RESERVE TANK
DUSH COVER AND RESERVE TANK (OPEN)
BATTERY HARNESS
BATTERY RERAY AND WORKING LAMP
FENDER WIRING HARNESS(#20001-20197)
FENDER WIRING HARNESS(#20198-)
FENDER WIRING HARNESS (FRONT)
FLOOR MOUNTING
HOOD MOUNTING
FENDER
CIRCUIT BREAKER(#20001-20020)
CIRCUIT BREAKER(#20021-)
BATTERY AND FENDER WIRING HARNESS
BATTERY AND FENDER WIRING HARNESS (WITH ISOLATOR SWITCH)
HYDRAULIC OIL TANK
RIPPER DELIVERLY PIPING
RIPPER DELIVERLY PIPING (WITHOUT RIPPER PIPING)
CONTROL VALVE (FOR DUAL TILT PILOT PIPING)
CONTROL VALVE (FOR DUAL TILT PILOT PIPING) (WITHOUT RIPPER)
CONTROL VALVE RELATED
CONTROL VALVE RELATED (WITHOUT RIPPER)
CONTROL VALVE (FOR PUMP PRESSURE PIPING)
CONTROL VALVE (FOR PUMP PRESSURE PIPING) (FOR SUPER DOZER)
WASHER TANK
RETURN PIPING
PPC BLOCK (FOR DUAL TILT DOZER) (1/3)
PPC BLOCK (FOR SUPER DOZER) (WITHOUT RIPPER)
PPC BLOCK (FOR DUAL TILT DOZER) (2/3)
PPC BLOCK (FOR DUAL TILT DOZER) (3/3)(#20001-20017)
PPC BLOCK (FOR DUAL TILT DOZER) (3/3)(#20018-)
PPC VALVE ACCUMULATOR PIPING(#20001-20228)
PPC VALVE ACCUMULATOR PIPING(#20229-)
TANK LEVEL SENSOR
PLUG (FOR TANK WITHOUT SENSOR)
PRE-LUBRICATION PUMP MOUNTING(#20001-20176)
PRE-LUBRICATION PUMP MOUNTING(#20177-)
FENDER RELATED AND FIREPROOF
FENDER COVER (1/2)
FENDER COVER (2/2)
FENDER COVER (2/2) (WITH PLATE IN ENGLISH)
FENDER COVER (2/2) (WITH PLATE IN SPANISH)
FENDER COVER (2/2) (WITH PLATE IN PORTUGUESE)
FENDER COVER (2/2) (WITH PLATE IN RUSSIAN)
REAR COVER
ROPS MOUNTING
UNDER GUARD
UNDER CARRIAGE
TRACK SHOE (LUBRICATE TYPE) (810MM WIDE) (SINGLE GROUSER) (WITH WEDGE RING) (80 SET)
TRACK SHOE (LUBRICATE TYPE) (910MM WIDE) (SINGLE GROUSER) (WITH WEDGE RING) (80 SET)
TRACK SHOE (LUBRICATE TYPE) (710MM WIDE) (SINGLE GROUSER) (WITH WEDGE RING) (80 SET)
TRACK SHOE (LUBRICATE TYPE) (710MM WIDE) (SINGLER) (WITH WEDGE RING) (COLD WEATHER (A))(80 SET)
TRACK SHOE (LUBRICATE TYPE) (710MM WIDE) (SINGLE GROUSER) (WITH WEDGE RING) (WITH HOLE) (80 SET)
TRACK SHOE (LUBRICATE TYPE) (810MM WIDE) (SINGLE GROUSER) (WITH WEDGE RING) (WITH HOLE) (80 SET)
TRACK SHOE (LUBRICATE TYPE) (810MM WIDE) (SINGLE) (WITH WEDGE RING) (COLD WEATHER (B))(80 SET)
TRACK SHOE (LUBRICATE TYPE) (810MM WIDE) (SINGLE) (WITH WEDGERIN G) (WITH HOLE) (HEAVY DUTY)(80SET)
TRACK SHOE (LUBRICATE TYPE) (710MM WIDE) (SINGLE) (WITH WEDGE RING) (WITH HOLE) (HEAVY DUTY)(80SET)
TRACK SHOE (LUBRICATE TYPE) (810MM WIDE) (SINGLE) (WITH WEDGE RING) (FOR 8 TRACK ROLLER) (82 SET)(#20088-)
TRACK SHOE (LUBRICATE TYPE) (710MM WIDE) (SINGLE) (WITH WEDGE RING) (FOR 8 TRACK ROLLER) (82 SET)(#20088-)
TRACK FRAME (L.H.)
TRACK FRAME (L.H.) (COAL DOZER)
TRACK FRAME (L.H.) (FOR DUAL TILT DOZER)(#20180-)
CARTRIDGE PIN (L.H.)
TRACK FRAME (TRACK ROLLER) (SINGLE) (L.H.)(#20180-)
TRACK FRAME GUARD (L.H.)
TRACK FRAME (CARTRIDGE PIN) (L.H.)(#20180-)
TRACK ROLLER (DOUBLE) (L.H.)
TRACK FRAME (GUARD) (L.H.) (FOR DUAL TILT PITCH DOZER)(#20180-)
BOGIE (L.H.) (2ND)
TRACK FRAME (2ND BOGIE) (TRACK ROLLER) (DOUBLE) (1/2) (L.H.)(#20180-)
BOGIE (L.H.) (3RD)
TRACK FRAME (2ND BOGIE) (TRACK ROLLER) (DOUBLE) (2/2) (L.H.)(#20180-)
BOGIE (L.H.) (4TH)
TRACK FRAME (2ND BOGIE) (L.H.) (FOR DUAL TILT DOZER)(#20180-)
TRACK ROLLER (SINGLE) (L.H.)
TRACK ROLLER (L.H.) (TAR SAND SPEC.)
TRACK FRAME (3RD BOGIE) (TRACK ROLLER) (DOUBLE) (1/2) (L.H.)(#20180-)
CARRIER ROLLER (L.H.)
TRACK FRAME (3RD BOGIE) (TRACK ROLLER) (DOUBLE) (2/2) (L.H.)(#20180-)
RECOIL SPRING (L.H.)
TRACK FRAME (3RD BOGIE) (L.H.) (FOR DUAL TILT DOZER)(#20180-)
FRONT IDLER (L.H.)
TRACK FRAME (4TH BOGIE) (TRACK ROLLER) (DOUBLE) (L.H.)(#20180-)
EQUALIZER BAR LUBRICATION (L.H.)
TRACK FRAME (4TH BOGIE) (TRACK ROLLER) (SINGLE) (L.H.)(#20180-)
TRACK FRAME COVER (L.H.)
TRACK FRAME COVER (L.H.) (COAL DOZER)
TRACK FRAME (4TH BOGIE) (L.H.) (FOR DUAL TILT DOZER)(#20180-)
TRACK FRAME (R.H.)(#20001-20179)
TRACK FRAME (R.H.) (COAL DOZER)
TRACK FRAME (CARRIER ROLLER) (L.H.)(#20180-)
CARTRIDGE PIN (R.H.)
TRACK FRAME (RECOIL SPRING) (L.H.)(#20180-)
TRACK FRAME GUARD (R.H.)
TRACK FRAME (FRONT IDLER) (L.H.)(#20180-)
TRACK ROLLER (DOUBLE) (R.H.)
TRACK FRAME (COVER AND EQUALIZER BAR LUBRICATION) (L.H.)(#20180-)
BOGIE (R.H.) (2ND)
TRACK FRAME (PIVOT) (L.H.) (FOR DUAL TILT DOZER)(#20180-)
BOGIE (R.H.) (3RD)
TRACK FRAME (COVER) (L.H.) (FOR DULAL TILT PICH DOZER)(#20180-)
BOGIE (R.H.) (4TH)
TRACK FRAME (R.H.) (FOR DUAL TILT DOZER)(#20180-)
TRACK ROLLER (SINGLE) (R.H.)
TRACK FRAME (TRACK ROLLER) (SINGLE) (R.H.)(#20180-)
CARRIER ROLLER (R.H.)
TRACK FRAME (CARTRIDGE PIN) (R.H.)(#20180-)
RECOIL SPRING (R.H.)
TRACK FRAME (GUARD) (R.H.) (FOR DUAL TILT DOZER)(#20180-)
FRONT IDLER (R.H.)
TRACK FRAME (2ND BOGIE) (TRACK ROLLER) (DOUBLE) (1/2) (R.H.)(#20180-)
EQUALIZER BAR LUBRICATION (R.H.)
TRACK FRAME (2ND BOGIE) (TRACK ROLLER) (DOUBLE) (2/2) (R.H.)(#20180-)
TRACK FRAME COVER (R.H.)
TRACK FRAME COVER (R.H.) (COAL DOZER)
TRACK FRAME (2ND BOGIE) (R.H.) (FOR DUAL TILT DOZER)(#20180-)
TRACK FRAME (3RD BOGIE) (TRACK ROLLER) (DOUBLE) (1/2) (R.H.)(#20180-)
TRACK FRAME (3RD BOGIE) (TRACK ROLLER) (DOUBLE) (2/2) (R.H.)(#20180-)
TRACK FRAME (3RD BOGIE) (R.H.) (FOR DUAL TILT DOZER)(#20180-)
TRACK FRAME (4TH BOGIE) (TRACK ROLLER) (DOUBLE) (R.H.)(#20180-)
TRACK FRAME (4TH BOGIE) (TRACK ROLLER) (SINGLE) (R.H.)(#20180-)
TRACK FRAME (4TH BOGIE) (R.H.) (FOR DUAL TILT DOZER)(#20180-)
TRACK FRAME (CARRIER ROLLER) (R.H.)
TRACK FRAME (RECOIL SPRING) (R.H.)(#20180-)
TRACK FRAME (FRONT IDLER) (R.H.)(#20180-)
TRACK FRAME (COVER AND EQUALIZER BAR LUBRICATION) (R.H.)(#20180-)
TRACK FRAME (PIVOT) (R.H.) (FOR DUAL TILT DOZER)(#20180-)
TRACK FRAME (COVER) (R.H.)(#20180-)
TRACK FRAME (PLUG)(#20180-)
WORK EQUIPMENT
STRAIGHT TILT FRAME (HEAVY DUTY TYPE) (SEMI-U) (FULL-U)
STRAIGHT TILT FRAME (HEAVY DUTY TYPE) (FOR SUPER DOZER)
STRAIGHT TILT FRAME (BLADE TILT PIPING) (FOR DUAL TILT DOZER)
STRAIGHT TILT FRAME (BLADE TILT PIPING)
STRAIGHT TILT FRAME (BLADE TILT PIPING) (FOR SUPER DOZER)
FULL-U BLADE (HEAVY DUTY)(#20001-20119)
FULL-U BLADE (HEAVY DUTY)(#20120-)
SEMI U-BLADE (HEAVY DUTY) (1/2)
BLADE (HEAVY DUTY AND SUPER DOZER)
SPILL GUARD (FOR SUPER DOZER)
SPIL GUARD (FOR HEAVY DUTY FULL-U)
SPILL GUARD (FOR HEAVY DUTY SEMI-U)
BLADE (COAL)
SEMI U-BLADE (HEAVY DUTY) (1/2) (WITH PUSH PLATE)
SEMI U-BLADE (HEAVY DUTY) (1/2) (THICK CUTTING EDGE)
FULL U-BLADE (HEAVY DUTY) (1/2) (THICK CUTTING EDGE)(#20001-20119)
FULL U-BLADE (HEAVY DUTY) (1/2) (THICK CUTTING EDGE)(#20120-)
STRAIGHT TILT U-BLADE (HEAVY DUTY TYPE) (2/2)
SEMI U-BLADE (HEAVY DUTY) (2/2)
BLADE LIFT CYLINDER
BLADE TILT CYLINDER (DUAL TILT DOZER)
BLADE TILT CYLINDER AND BRACE
BLADE TILT CYLINDER (FOR SUPER DOZER)
BLADE TILT CYLINDER (DUAL TILT DOZER) (DOUBLE DUST SEAL, WITHOUT SCRAPER)(#20240-)
BLADE TILT CYLINDER AND BRACE (DOUBLE DUST SEAL, WITHOUT SCRAPER)(#20240-)
HYDRAULIC PIPING (BLADE TILT PIPING) (FOR DUAL TILT DOZER)
HYDRAULIC PIPING (BLADE TILT PIPING)
BLADE TILT PIPING (FOR SUPER DOZER)
RIPPER BEAM AND ARM (FOR GIANT RIPPER)
RIPPER BEAM AND ARM (FOR MULTI RIPPER)
RIPPER SHANK AND POINT (FOR GIANT RIPPER)
RIPPER SHANK AND POINT (FOR MULTI RIPPER)
RIPPER SHANK AND POINT (FOR GIANT RIPPER) (GIANT LONG PROTECTOR)
GREASE PIPING (FOR RIPPER)(#20001-20174)
RIPPER CYLINDER(#20175-)
RIPPER CYLINDER(#20001-20174)
PIN RULLER CYLINDER AND PLATE (SHANK LESS)(#20175-)
RIPPER PLATE (FOR MULTI RIPPER)(#20175-)
GREASE PIPING (FOR RIPPER)(#20175-)
RIPPER BEAM AND ARM (MULTI SHANK RIPPER)
RIPPER POINT (FOR MULTI RIPPER) (LIMESTONE)
RIPPER POINT (FOR GIANT RIPPER) (LIMESTONE)
RIPPER POINT (FOR MULTI RIPPER) (YELLOW, REVERSIBLE)
RIPPER POINT (FOR GIANT RIPPER) (YELLOW, REVERSIBLE)
RIPPER POINT (FOR MULTI RIPPER) (LONG, RED) (SEMI-HARD)
RIPPER POINT (FOR GIANT RIPPER) (LONG, RED) (SEMI-HARD)
RIPPER POINT (FOR MULTI RIPPER) (RED,REVERSIBLE) (HEAVY-DUTY)
RIPPER POINT (FOR GIANT RIPPER) (RED, REVERSIBLE)
RIPPER CYLINDER PIPING
RIPPER POINT LAMP
COUNTERWEIGHT
ADDITIONAL COUNTERWEIGHT
LARGE COUNTERWEIGHT
MARKS AND PLATES
MARKS AND PLATES (ENGLISH) (FOR U.S.A.)(#20001-20229)
MARKS AND PLATES (ENGLISH) (FOR U.S.A.)(#20230-)
MARKS AND PLATES (ENGLISH)
MARKS AND PLATES (ENGLISH) (FOR U.S.A. SUPER DOZER)(#20001-20229)
MARKS AND PLATES (ENGLISH) (FOR U.S.A. SUPER DOZER)(#20230-)
MARKS AND PLATES (ENGLISH) (FOR SUPER DOZER)
MARKS (LARGE DECAL)
BATTERY CAUTION (ONLY U.S.A)
MARKS AND PLATES (HANDLING)
MARKS AND PLATES (REAR REFRECTOR) (FOR EU SPEC.)
MARKS AND PLATE (EXCEPT JAPAN) (ROPS)(#20001-20229)
MARKS AND PLATE (EXCEPT JAPAN) (ROPS)(#20230-)
MARKS AND PLATE (ENGLISH) (SEAT BELT)
MARKS AND PLATE (RUSSIAN) (SEAT BELT)
MARKS AND PLATE (CHINESE) (SEAT BELT)
MARKS AND PLATE (SPANISH) (SEAT BELT)
MARKS AND PLATE (GERMAN) (SEAT BELT)
MARKS AND PLATE (INDONESIAN) (SEAT BELT)
MARKS AND PLATE (PORTUGUSE) (SEAT BELT)
MARKS AND PLATE (GREEK) (SEAT BELT)
MARKS AND PLATE (FRENCH) (SEAT BELT)
PLATE (BLADE)(#20122-)
PLATE (RIPPER)(#20122-)
ACCESSORY
MISCELLANEOUS
SERVICE KIT AND COMPONENT PARTS
KIT (TORQUE CONVERTER AND TRANSMISSION)
SHOE BOLT AND NUT SERVICE KIT
TRACK LINK (LUBRICATE TYPE) (WITH WEDGE RING) (MASTER LINK 2 PLACE TYPE) (80 SET)
TRACK LINK (LUBRICATE TYPE) (WITH WEDGE RING) (MASTER LINK 2 PLACE TYPE) (COLD WEATHER (B)) (80 SET)
TRACK LINK (LUBRICATE TYPE) (WITH WEDGE RING) (MASTER LINK 2 PLACE TYPE) (HEAVY-DUTY) (80 SET)
TRACK LINK (LUBRICATE TYPE) (WITH WEDGE RING) (MASTER LINK 2 PLACE TYPE) (8 TRACK ROLLER) (82 SET)(#20088-)
TRACK LINK (LUBRICATE TYPE) (WITH WEDGE RING) (MASTER LINK 2 PLACE TYPE) (COLD WEATHER (A)) (80 SET)
ECMV ASS'Y (FOR STEERING)
PARKING BRAKE VALVE (FOR STEERING)
PREVENT STEEP BRAKE VALVE (FOR STEERING)(#20001-(100739))
PREVENT STEEP BRAKE VALVE (FOR STEERING)(#(100740)-)
OPERATOR'S SEAT ASS'Y (GRAMMER) (AIR SUSPENSION TYPE) (FABRIC) (1/2)
OPERATOR'S SEAT ASS'Y (FABRIC)
PISTON PUMP (1/11)
PISTON PUMP (2/11)
PISTON PUMP (3/11)
PISTON PUMP (4/11)
PISTON PUMP (5/11)
PISTON PUMP (6/11)
PISTON PUMP (7/11)
PISTON PUMP (8/11)
PISTON PUMP (9/11)
PISTON PUMP (10/11)
PISTON PUMP (11/11)
FAN PUMP (1/11)
FAN PUMP (2/11)
FAN PUMP (3/11)
FAN PUMP (4/11)
FAN PUMP (5/11)
FAN PUMP (6/11)
FAN PUMP (7/11)
FAN PUMP (8/11)
FAN PUMP (9/11)
FAN PUMP (10/11)
FAN PUMP (11/11)
HYDRAULIC PUMP (POWER LINE)
SCAVENGING PUMP
BLADE LIFT CYLINDER (1/2)
BLADE LIFT CYLINDER (1/2) (COLD WEATHER (A) SPEC.)
BLADE LIFT CYLINDER (1/2) (COLD WEATHER (A) SPEC.)(#20232-)
BLADE LIFT CYLINDER (WITH DOUBLE DUST SEAL)(1/2)(#20230-)
BLADE LIFT CYLINDER (2/2)(#20001-20120)
BLADE LIFT CYLINDER (2/2)(#20121-)
BLADE LIFT CYLINDER (2/2) (COLD WEATHER (A) SPEC.)
BLADE LIFT CYLINDER (WITH DOUBLE DUST SEAL)(1/2)(#20230-)
BLADE TILT CYLINDER
BLADE TILT CYLINDER (COLD WEATHER (A) SPEC.)
BLADE TILT CYLINDER (WITH DOUBLE DUST SEAL)(1/2)(#20230-)
BLADE TILT CYLINDER (WITH DOUBLE DUST SEAL, WITHOUT SCRAPER)(#20240-)
BLADE TILT CYLINDER (FOR SUPER DOZER)
BLADE TILT CYLINDER (FOR SUPER DOZER) (WITH DOUBLE DUST SEAL)(#20230-)
RIPPER LIFT CYLINDER
FAN MOTOR (1/3)
FAN MOTOR (2/3)
FAN MOTOR (3/3)
CONTROL VALVE (1/13)
CONTROL VALVE (2/13)
CONTROL VALVE (3/13)
CONTROL VALVE (4/13)
CONTROL VALVE (5/13)
CONTROL VALVE (6/13)
CONTROL VALVE (7/13)
CONTROL VALVE (8/13)
CONTROL VALVE (9/13)
CONTROL VALVE (10/13)
CONTROL VALVE (11/13)
CONTROL VALVE (12/13)
CONTROL VALVE (13/13)
PPC VALVE (FOR RIPPER CONTROL)
PPC VALVE (FOR RIPPER CONTROL)(#20167-)
PPC VALVE (FOR BLADE CONTROL)
ELECTRIC LEVER
ELECTRIC LEVER(#20180-)
ELECTRIC LEVER (VHMS/BULGA)
AIR CONDITIONER UNIT
BLOWER
AIR CONDITIONER RELATED PARTS