D575A-3-M S/N 10101-UP
290 pages · 269 diagrams
- D575A-3-M
- BULLDOZERS
KOMATSU D575A-3-M S/N 10101-UP
ENGINE RELATED PARTS
COOLING SYSTEM
FUEL TANK AND RELATED PARTS
ELECTRICAL SYSTEM
TORQUE CONVERTOR, TRANSMISSION, STEERING AND FINAL DRIVE
UNIVERSAL JOINT
STEERING CASE
STEERING GEAR
STEERING LUBRICATION TUBE AND CLUTCH
STEERING BRAKE
STEERING LUBRICATION TUBE AND GEAR (WITH RIPPER)(#10105-)
STEERING CONTROL VALVE SEAT
BRAKE VALVE AND CONTROL VALVE
STEERING CONTROL VALVE (ECMV)
STEERING CONTROL VALVE SEAT
STEERING PIPING (T/C FILTER TO PUMP)
T/C FILTER AND STEERING PIPING
TRANSMISSION LUBRICATION FILTER
TRANSMISSION FILTER
OIL STRAINER
STEERING PIPING RETURN LINE
CONCENTRATED PIPING
GRAITING
TORQUE CONVERTER (1/2), BARE AND INPUT
TORQUE CONVERTER (2/2), DRIVE CASE, REAR HOUSING AND SCAVENGING PUMP
POWER TAKE OFF (1/2)
POWER TAKE OFF (2/2)
TORQUE CONVERTER VALVE (1/2)
TORQUE CONVERTER VALVE (2/2)
TORQUE CONVERTER CHARGING PUMP
TRANSMISSION (1/5) (BARE)
TRANSMISSION (2/5) (HOUSING) (1/2)
TRANSMISSION (2/5) (HOUSING) (2/2)
TRANSMISSION (3/5) (CARRIER) (1/2)
TRANSMISSION (3/5) (CARRIER) (1/2)
TRANSMISSION (4/5) (CASE)
TRANSMISSION (5/5) (INPUT AND OUTPUT)
TRANSMISSION CONTROL VALVE SEAT
TRANSMISSION CONTROL VALVE (FILTER)
TRANSMISSION CONTROL VALVE
TRANSMISSION CONTROL VALVE (ECMV) (1/2)
TRANSMISSION CONTROL VALVE (ECMV) (2/2)
TRANSMISSION LUBRICATION VALVE
FINAL DRIVE (1/6) (L.H.) (WITH RIPPER)(#10105-)
FINAL DRIVE (2/6) (L.H.) (WITH RIPPER) (FOR FUJISAKA)(#10105-)
FINAL DRIVE (3/6) (L.H.) (W/RIPPER) (FOR FUJISAKA)
FINAL DRIVE (4/6) (L.H.) (WITH RIPPER)(#10105-)
FINAL DRIVE (5/6) (L.H.)
FINAL DRIVE (6/6) (L.H.)
FINAL DRIVE (1/6) (R.H.) (WITH RIPPER)(#10105-)
FINAL DRIVE (2/6) (R.H.) (WITH RIPPER)(#10105-)
FINAL DRIVE (3/6) (R.H.) (FOR FUJISAKA)
FINAL DRIVE (4/6) (R.H.) (WITH RIPPER)(#10105-)
FINAL DRIVE (5/6) (R.H.)
FINAL DRIVE (6/6) (R.H.)
POWER LINE MOUNT
BRAKE CONTROL LINKAGE
ELECTRICAL SYSTEM (POWER LINE) (1/2)
ELECTRICAL SYSTEM (POWER LINE) (2/2)(#10101-10102)
ELECTRICAL SYSTEM (POWER LINE) (2/2) (WITH RIPPER)(#10105-)
ELECTRICAL SYSTEM (75A ALTERNATOR)(#10101-10104)
ELECTRICAL SYSTEM (100A ALTERNATOR)(#10105-)
HYDRAULIC SYSTEM
HYDRAULIC TANK (FOR RIPPER)(#10105-)
HYDRAULIC MAIN VALVE (FOR RIPPER)(#10105-)
HYDRAURIC PUMP (FOR RIPPER)(#10105-)
HYDRAULIC PIPING (DELIVERY LINE) (FOR RIPPER)(#10105-)
HYDRAULIC PIPING (TANK TO PUMP) (FOR RIPPER)(#10105-)
P.P.C.MAIN LINE (FOR RIPPER)(#10105-)
P.P.C. RETURN LINE (FOR RIPPER)(#10105-)
P.P.C. PIPING (BLADE LINE) (FOR RIPPER)(#10105-)
P.P.C. RIPPER LINE(#10105-)
HYDRAULIC PIPING (BLADE LIFT LINE) (1/4) (WITH RIPPER)(#10105-)
HYDRAULIC PIPING (BLADE LIFT LINE) (2/4)
HYDRAULIC PIPING (BLADE LIFT LINE) (3/4)
HYDRAULIC PIPING (BLADE LIFT LINE) (4/4)
BLADE TILT LINE
HYDRAULIC PIPING (RIPPER LINE) (L.H.)(#10105-)
HYDRAULIC PIPING (RIPPER LINE) (R.H.)(#10105-)
HYDRAULIC PIPING (FOR RIPPER)(#10105-)
PIN PULLER PIPING (FOR RIPPER)(#10105-)
HYDRAULIC OIL COOLER LINE (WITH RIPPER)(#10105-)
MAIN FRAME AND RELATED PARTS
OPERATOR'S COMPARTMENT AND CONTROL SYSTEM
OPERATOR'S SEAT (FABRIC SEAT)(#10105-)- OPERATOR'S SEAT (FABRIC SEAT)(#10105-)
OPERATOR'S SEAT STAND(#10105-)
SEAT BELT (78MM)- SEAT BELT (FOR KAB)(#10105-)
STEEL CAB (1/10) (BODY AND DOOR LOCK)
STEEL CAB (2/10) (DOOR HANDLE)(#10101-10101)
STEEL CAB (2/10) (DOOR HANDLE)
STEEL CAB (3/10) (SIDO GLASS)
STEEL CAB (4/10) (SIDE WINDOW, L.H.)
STEEL CAB (5/10) (SIDE WINDOW, R.H.)
STEEL CAB (6/10) (REAR WINDOW)
STEEL CAB (7/10) (FURNITURE IN CAB)
STEEL CAB (8/10) (INNER TOP COVER)
STEEL CAB (9/10) (CAB ELECTRICAL PARTS)
STEEL CAB (10/10) (SWITCH)
PLUG COVER (WITHOUT AIR CONDITIONER)(#10105-)
PLUG COVER (RADIO LESS)(#10105-)
STEREO CASSETTE (FOR JAPAN)(#10105-)
CAB MOUNT (SWITCH AND CAB MOUNT)
AIR CONDITIONER PANEL HARNESS(#10105-)
CONTROL PANEL (FOR AIR CONDITIONER)(#10105-)
FLOOR MAT
LARGE MIRROR
ROPS GUARD
STEREO CASSETTE (FOR JAPAN)(#10101-10104)
EXTINGUISHER
CUP HOLDER
TRAVEL CONTROL LEVER(#10105-)
SLIDER AND LIFT(#10105-)
LIFT(#10105-)
TRAVEL CONTROL (ADJUST LINK)(#10105-)
DECELERATOR PEDAL AND BRAKE PEDAL
DECELERATOR PEDAL AND BRAKE PEDAL LINKAGE
BRAKE CONTROL LINKAGE
BRAKE CONTROL LEVER
BLADE CONTROL (PPC PIPING) (WITH RIPPER)(#10105-)
BLADE CONTROL LOCK VALVE (WITH RIPPER)(#10105-)
RIPPER CONTROL LEVER(#10105-)
VALVE BLOCK(#10105-)
BLADE CONTROL (ACCUMULATE)(#10105-)
ARM REST(#10105-)
AIR CONDITIONER UNIT (1/2)
AIR CONDITIONER UNIT (2/2)
AIR CONDITIONER (1/4)(#10101-10104)
AIR CONDITIONER (1/4)
AIR CONDITIONER (2/4)
AIR CONDITIONER (DISTRIBUTOR)(3/4)
AIR CONDITIONER (4/4)
FLOOR FRAME (WITH RIPPER)(#10105-)
FLOOR FRAME MOUNT(#10105-)
FLOOR FRAME MONITOR PANEL (WITH RIPPER)(#10105-)
WIRING (FUSE BOX)
WIRING (CONTROLLER BOX)
WIRING (FLOOR)
UNDER FLOOR WIRING (WITH RIPPER)(#10105-)
PANEL HARNESS AND PPC SIGNAL(WITH RIPPER)(#10105-)
CONTROL BOX HARNESS (WITH RIPPER)(#10105-)
AIR CONDITIONER AND SENSOR WIRING(#10105-)
PRESSURISER(#10105-)
FLOOR FRAME SUPPORT AND ANGLE SENSOR(#10105-)
CAUTION PLATE (WITH RIPPER)(#10105-)
MONITOR PANEL(#10105-)
WINDOW WASHER TANK
AIR CONDITIONER PANEL(#10101-10104)
GUARD
RADIATOR GUARD (WITH RIPPER)(#10105-)
BLADE LIFT CYLINDER YOKE (WITH RIPPER)(#10105-)
HEAD LAMP (WITH RIPPER)(#10105-)
HEAD LAMP WIRING (WITH RIPPER)(#10105-)
ENGINE HOOD AND COVER (SUPER DOZER)(#10105-)
PERFORATED SIDE COVER L.H.(WITH RIPPER)(#10105-)
PERFORATED SIDE COVER R.H.(WITH RIPPER)(#10105-)
ETHER STARTING(#10101-10104)
ETHER STARTING (FOR JAPAN)
FENDER (L.H.) (WITH RIPPER)(#10105-)
FENDER (R.H.) (WITH RIPPER)(#10105-)
SIDE COVER
FLOOR PLATE (FRONT)(WITH RIPPER)(#10105-)
FLOOR PLATE (CENTER)
FLOOR PLATE (REAR)
FIRE DEFENSE COVER
ENGINE REAR MIST COVER
WORK LAMP AND ALARM
REAR COVER (WITH RIPPER)(#10105-)
HAND RAIL (WITH RIPPER) (1/2)
HAND RAIL (WITH RIPPER AND EXTINGUISHER) (1/2)
HAND RAIL (2/2)
UNDER GUARD (WITH RIPPER)(#10105-)
UNDER CARRIAGE
FRONT IDLER
IDLER CUSHION (WITH RIPPER)(#10105-)
CHECK VALVE (WITH RIPPER)(#10105-)
TRACK ROLLER (SINGLE FLANGE) (WITH RIPPER)(#10105-)
TRACK ROLLER (DOUBLE FLANGE) (WITH RIPPER)(#10105-)
TRACK ROLLER BOGIE (WITH RIPPER)
CARRIER ROLLER (WITH RIPPER)
TRACK SHOE (910MM) (WITH RIPPER)- TRACK SHOE (760MM) (WITH RIPPER)(#10105-)
- TRACK SHOE (810MM) (WITH RIPPER)
TRACK FRAME L.H. (SEGMENTED FULL ROLLER GUARD)(#10105-)
TRACK FRAME L.H. (WITH RIPPER)
TRACK FRAME R.H. (SEGMENTED FULL ROLLER GUARD)(#10105-)
TRACK FRAME R.H. (WITH RIPPER)
SEGMENTED FULL ROLLER GUARD(#10105-)
WORK EQUIPMENT
STRAIGHT TILT FRAME (FOR SEMI-U OR U DOZER)
STRAIGHT TILT FRAME (REINFORCED TYPE) (FOR SEMI-U OR U DOZER)
STRAIGHT TILT FRAME (FOR DUAL TILT SEMI-U OR DUAL TILT U DOZER)
STRAIGHT TILT FRAME (REINFORCED TYPE) (1/2)(#10105-)
STRAIGHT TILT FRAME (REINFORCED TYPE) (FOR DUAL TILT SEMI-U OR DUAL TILT U DOZER)- STRAIGHT TILT FRAME (REINFORCED TYPE) (DUAL TILT DOZER) (1/2)
STRAIGHT TILT FRAME (WITH WEAR PLATE) (2/2)(#10105-)
STRAIGHT TILT SEMI U-BLADE (WITH WEAR PLATE)(#10105-)
STRAIGHT DUAL TILT SEMI U-BLADE (WITH WEAR PLATE)(#10105-)
STRAIGHT TILT SEMI U-BLADE(#10105-)
SPILL GUARD (SEM-U BLADE)(#10105-)
BLADE LIFT CYLINDER (WITH RIPPER)(#10105-)
BLADE TILT CYLINDER (DUAL TILT PITCH DOZER)
BLADE TILT CYLINDER AND BRACE(#10105-)
BLADE TILT PIPING(#10105-)
HYDRAULIC PIPING (DUAL TILT PITCH DOZER) (1/2)
HYDRAULIC PIPING (DUAL TILT PITCH DOZER) (1/2)
GIANT RIPPER (VARIABLE TYPE)(#10105-)
RIPPER SHANK (VARIABLE TYPE) (SEGMENT TYPE)(#10105-)
RIPPER SHANK (VARIABLE TYPE)(#10105-)
RIPPER SHANK (VARIABLE TYPE) (LONG PROTECTOR)
RIPPER POINT (VARIABLE TYPE)(#10105-)
RIPPER CYLINDER PIPING(#10105-)
RIPPER LIGHT(#10105-)
GREASE PIPING (FOR RIPPER)(#10105-)
MARKS AND PLATES
ACCESSORY
SERVICE KIT AND COMPONENT PARTS
SHOE BOLT AND NUT SERVICE KIT
TRACK LINK (LUBRICATE TYPE) (MASTER LINK 2 PLACE TYPE) (SUPPLY PARTS)(#10105-)
HYDRAULIC PUMP (TRANSMISSION LUBRICATION)
HYDRAULIC PUMP (WORK EQUIPMENT AND PILOT) (1/3)
HYDRAULIC PUMP (WORK EQUIPMENT AND PILOT) (2/3)
HYDRAULIC PUMP (WORK EQUIPMENT AND PILOT) (3/3)
HYDRAULIC PUMP (WORK EQUIPMENT )(#10105-)
BLADE LIFT CYLINDER (1/2) (WITH RIPPER)(#10105-)
BLADE LIFT CYLINDER (2/2) (WITH RIPPER)(#10105-)
DUAL TILT CYLINDER (WITH RIPPER)(#10105-)
RIPPER LIFT CYLINDER(#10105-)
RIPPER TILT CYLINDER(#10105-)
PIN PULLER CYLINDER(#10105-)
CONTROL VALVE (1/2) (RIPPER)(#10105-)
CONTROL VALVE (2/2) (RIPPER)(#10105-)
CONTROL VALVE (1/2) (RIPPER)(#10105-)
CONTROL VALVE (2/2) (RIPPER)(#10105-)
PPC VALVE